Tapered Parallel Plate Waveguide Setup

Fig. 1. (a) Schematic of the tapered parallel plate waveguide, consisting of two aluminum plates of a varying width (input 3 mm, output 49 mm) and adjustable plate separation (1 mm at the input and between 0 mm and 500 mm at the output). (b) Setup for THz wave focussing inside TPPWG. THz radiation is generated using the tilted wavefront method in LiNbO3, coupled into the TPPWG, propagates along it, couples out and is detected in 300 mm-thick [110] GaP crystal in reflection configuration. Distance between output of TPPWG and the GaP crystal is

This content is restricted to members of the THz labs. If you are an existing user, please login. New users may register below.

Existing Users Log In
 Remember Me  

This post is password protected. Enter the password to view comments.

© 2012 Terahertz.dk Our research is carried out at DTU Fotonik - Department of Photonics Engineering, Technical University of Denmark. Suffusion theme by Sayontan Sinha